Hiren's BootCD From USB Flash Drive (USB Pen Drive)

Step 1
Put the BootCD 8 or newer in CD Drive

OR
If you want to extract boot files from iso then Download extract-boot-files.zip
Extract and open readme for more instruction. and skip to step 4

Step 2
Start Mini Windows 98

Step 3
Copy Files From A:\ (Floppy Drive) using Explorer to C:\USB and Restart Computer to normal Windows

OR
Note: if you can not see your hard drive from mini windows 98 then you will need a blank floppy disk.
click Start > Turn Off > Exit to Dos and type COPY A:\*.* B:\
Now remove floppy and Restart Computer to your normal Windows and insert your floppy disk
and copy all files from floppy disk to C:\USB

Step 4
Download USB Disk Storage Format (34KB)

Note: USB Disk Storage Format works on xp, for windows 98 Go to My computer and
Right click on the USB Drive and click on format. You will need a USB Flash Drive 128MB or more

Step 5
Copy All Files From C:\USB to Your USB Flash Drive
Please note: Do not overwrite IO.SYS when it prompts
Delete JO.SYS from USB Drive (NOT IO.SYS)

Step 6
Copy \BOOTCD folder to Your USB Drive

Step 7
Test Your USB Drive

Make sure you set your computer to boot from USB Flash Drive

To Enter the BIOS press the "Del" button on your keyboard. Alternatives are "F1", "F2", "Insert", and "F10". Some PC's BIOS might even require a different key to be pressed. Commonly a PC will show a message like "Press [Del] to enter Setup" to indicate that you need to press the "Del" key. Some AMI BIOS require you to enable the option "USB Keyboard Legacy support"!

For AMI BIOS:

For PHOENIX/AWARD BIOS:

• Go to "Advanced BIOS Features". Go to the "1st Boot device" and set it to "USB-ZIP".

Troubleshoot

If you are having problem while it creates Ram Drive then you may want to edit and delete all the /numhandles=128 from config.sys

Some users reported that it works fine on smaller (128MB) Usb Drives but not on 512MB or larger (cursor blinking at the top left corner)

If you get blinking cursor then try FAT32 format on larger drives

If you get an error about command.com not found when you run usb then try this under windows command prompt "attrib -s -h E:\command.com" where E is your usb drive letter

More Success Reports:
Extract win98-dos (or try winme-dos) files in C:\USB before you use usb_format.exe (Step 4)

If you have any other problem with Creating BootCD on USB Memory Stick
Contact me (Please include error messeges).