Bilginin Adresi Homepage
Forum Home Forum Home > Bilgisayar > İşletim Sistemleri
  New Posts New Posts RSS Feed - Usb belliği bootable yapmak. Usb den windows kurulumu
  FAQ FAQ  Forum Search   Events   Register Register  Login Login




El dokuma Konya Kilim, Kayseri Kilim, Antik Milas Halı, Antik Yörük Kilim, Hint Kilim

Konya Kilimleri Kayseri Kimleri Yörük İran ve Antika Kilimler Hint Kilimleri

Yeni ve 2. El İnşaat Yapı Malzemeleri

Masa iskele, Beton Paspayı, Kalıpaltı iskele, Güvenlikli iskele

Fayer İnşaat Ergenekon İnşaat

Usb belliği bootable yapmak. Usb den windows kurulumu

 Post Reply Post Reply
invertor View Drop Down
Security Professional
Security Professional

Joined: 18-01-2008
Status: Offline
Points: 3339
Post Options Post Options   Thanks (0) Thanks(0)   Quote invertor Quote  Post ReplyReply Direct Link To This Post Topic: Usb belliği bootable yapmak. Usb den windows kurulumu
    Posted: 18-08-2008 at 14:49

Usb bellekten windows kurulumu için yapılması gerekenler.

If you do not have a floppy disk drive, you may want to create a bootable USB memory key which will allow you to boot into a pure DOS environment. This can be very useful if you want to flash your BIOS. Here is a step by step procedure on how to perform this operation.
NOTE: Your computer must support booting from a USB device in order to boot from the USB Memory Key.

Step 1 - Download and install the Windows based HP USB Disk Format Tool. For your convenience, you can download it from HERE.

Step 2 - Download the Windows 98 system files from HERE. This is a zip file that contains all of the system files that you will need. Create a new folder and extract these files into the folder that you just created. Make sure that you preserve the directory structure.

Step 3 - Insert the USB Memory Key into the USB port of your computer.
NOTE: Make sure that the lock/unlock switch (if present) is set to the unlock position.

Step 4 - Launch the HP format tool program.

Under the device drop down list, make sure that the USB memory key is selected.

Step 5 - Under the file system drop down list, select FAT32. This is important to do correctly.

Step 6 - Check the box next to Create a DOS startup disk.

Select "using DOS system files located at:

Then click on the square box with 3 dots on it.

Step 7 - Browse to the folder that you extracted the Win98 system files and then click on the OK button.
Step 8 - Now click the Start button.
Step 9 - You will receive a warning message. Make sure you have the USB memory key selected. If you are sure, then click the Yes button.

Step 10 - Your USB memory key is now being formated and the DOS system files will be copied onto it.

Once the program has completed the operation, click on the Close button.

You now have a bootable USB memory key.

On the USB memory key, you will see these files. These are the basic Win98 system files.

If you want to have CDROM support when you boot from your USB memory key, copy these files, including the CDROM folder to the memory key. These files are the ones that you extracted earlier to a folder.

If you copy all of these files to the memory key, you will have mouse support for any DOS program that support this feature.

You will also have many other DOS utilities that are very useful.

Edited by invertor - 18-08-2008 at 14:57
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

This page was generated in 0.125 seconds.